Self-Polishing-Antifouling-Paint

Request a Quote Not what you need, please send your RFQs via Email.

Details

1. Long-term antifouling coatings. Effectively protect ship bottom against marine growths such as barnacle, oyster, bryozoans and algae.

2. Keep film surface smooth under the action of hydrolysis.

3. One coat can reaches 100μm of the film thickness; good workability.

Uses	As antifouling paint for the hull under boot tops.
Color	Iron red
Solid Content	75%
Specific Gravity	1.8
Coverage Rate	Theoretical:0.28kg/m2/100μm 0.172L/m2/100μm Actual: depending on the surface treatment, environment and application methods.
Thinner	Thinner for self-polishing paint
Mixing Ratio	One-pack
Film Thickness	Dry film thickness:100μm /coat Wet film thickness:200μm/coat
Coating System	Substrate: coated with vinyl tie coat Preceding Coat :refer to our coating system.
Surface Preparation	Remove oil and grease with a suitable detergent or degreaser. Remove dust and dirt by high-pressure air before paint application. Confirm the surface clean and dry.

More way to contact us

Tel: 86-23-68428875,68428422,68838417

Fax: 86-4008266163-88928

Email: sales@jinbomarine.com